The starting point for most projects incorporating control and monitoring functionalities. Multifunction device that integrates a 640 mA KNX power supply, KNX-IP Interface, 4 independent thermostats, logical module, 12 analog/digital inputs and 16 relay outputs (16 A C-Load) in only 12 DIN rail units. Offers multiple configuration options as individual outputs, shutter channels or fan coil controller (2/4 pipes).
- 640mA KNX power supply with 29VDC auxiliary output.
- 110-240VAC 50/60Hz power input.
- KNX system voltage supply and monitorization.
- Short-circuit and overvoltage protection.
- Reset button and overload status LED.
- KNXnet/IP tunneling protocol (up to 5 connections).
- Maximum APDU length of 254bytes.
- Ethernet 10/100 BaseT IP with RJ45 socket.
- 8 different configurable channels: shutter channels (up to 8), individual outputs (up to 16) and 2/4-pipe fan coil controls (up to 2).
- Outputs suitable for capacitive loads, maximum 140_F.
- Manual output operation through remote control.
- 12 analog/digital inputs.
- Output timing.
- 20 logic functions.
- Total data saving on KNX bus failure.
- Integrated KNX BCU.
- Dimensions 69 x 96 x 210mm (12 DIN units).
- DIN rail mounting (EN 50022), with fixing clamp.
- Possibility of connecting different phases in adjacent outputs.
- Conformity with the CE directives (CE-mark on the right side)
